查詢結果分析
來源資料
頁籤選單縮合
題 名 | 車燈射出模具設計之知識化工程建立與運用=The Construction and Application of Knowledge Based Engineering for Headlight Injection Mold Design |
---|---|
作 者 | 林維新; 陳建忠; | 書刊名 | 國立虎尾科技大學學報 |
卷 期 | 25:4 民95.12 |
頁 次 | 頁7-15 |
分類號 | 446.8924 |
關鍵詞 | 模具設計; 知識化工程; 參數設計; |
語 文 | 中文(Chinese) |
中文摘要 | 面對產品開發時程縮短的壓力,模具設計人員除利用加班方式完成模具開發工作以外,亦企圖思考從模具設計方法進行改善。本文針對汽車產業中之車燈模具設計過程進行探討,經由分析發現,模具頂出系統及水路循環系統在模具設計過程中,需要花費相當長時間於參數設定與調整,因此有必要進行改善。 本研究利用多重指令結合參數設計功能,以CATIA設計軟體為平臺,建構知識化工程,以降低模具設計負荷,縮短模具開發時間。經由改善結果,在頂出系統方面,頂出銷之開發時間,已由原來之8小時縮短為0.5小時;而在水路循環系統方面,水路噴流之開發時間,更由原來之14小時大幅縮短為2小時。改善效果非常顯著。 |
英文摘要 | Facing the pressure of shorten the production development schedule, the mold designer was forced to complete the mold development work by work overtime. The mold designer was also considered to improve the mold design technique. This paper was pointed to improve the mold design of headlight with knowledge based engineering. The design of ejection system and water cooling cycle system must spent many time in set and adjustment of design parameters. This study was tried to construct a knowledge base engineering by multi-command combined with parameter design method, in order to reduce the mold design load, shorten the mold development time. Through the improvement, the development time of ejection pin was shorted form 8 hours to 0.5 hours. And the development time of water cooling cycle system was shorten from 14 hours to 2hours. The improvement effect was very evident. |
本系統中英文摘要資訊取自各篇刊載內容。