查詢結果分析
來源資料
頁籤選單縮合
題名 | 光纖透鏡準直特性之研究=The Research of Collimated Characteristic on Fiber Lens |
---|---|
作者 | 高文顯; 姚志賢; | 書刊名 | 建國科大學報 |
卷期 | 26:1 民95.10 |
頁次 | 頁17-30 |
分類號 | 448.59 |
關鍵詞 | 準直; 光纖透鏡; 漸變折射率式光纖透鏡; 點膠式光纖透鏡; Collimated; Fiber lens; Gradient index fiber lens; UV-curable fiber lens; |
語文 | 中文(Chinese) |
中文摘要 | 在需要以長工作無距離以提高光程之應用情形下,常需要準直光束,故本論文是設計並製作具有準直光束之熔燒式光纖透鏡。本研究將探討如何分析製作熔燒式光纖透鏡、漸變折射率式光纖透鏡及點膠式光纖透鏡,並探討這三種光纖透鏡之差異及使用上之限制。在製作熔燒式光纖透鏡會因為電弧放電則透鏡有偏心的情況發生,目前可控制的曲率半徑是由電流改變來控制,範圍為70~125μm,誤差約±2μm.。漸變折射率式光纖透鏡僅需要做精密的切割即可完成,在切割長度可控制在100μm~10mm,由於切割儀精準度為10μm所以會有±2μm的誤差量。點膠式光纖透鏡透過電漿來處理表面即可控制曲率半徑,目前可控制的曲率半徑為65~92μm,誤差約±2μm。 |
英文摘要 | In order to improve the situation of application of heightening light in the long distance, the collimation light beam was always needed. The topic of this study was designing and making arcing fiber lens with collimation light beam. In this thesis, the main idea was how to analyze and make acing、gradient index and UV-curable fiber lens, and investigate the differences and restriction of usages between these three kinds of fiber lens. Lens will discharge due to the tilting arc during the making of arcing fiber lens. So far, this situation can be controlled by having the curvature radius range between 75~125μm. This can be completed by cutting the gradient index fiber lens with precise measurement. The range of cutting length was 100μm~10mm. As the result of the 10μm of distributing points limit, the margin of error with be ±2μm. The surface of UV-curable fiber lens can be handed through O□ plasma. So far, radius curvature can be controlled within the rage of 65~92μm and margin of error will be ±2μm. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。