查詢結果分析
來源資料
頁籤選單縮合
題 名 | 利用快速模具製作3C產品相關零件技術探討=The Research on 3C Product Parts Manufactured by Rapid Tooling Technique |
---|---|
作 者 | 史雷; | 書刊名 | 東南學報 |
卷 期 | 27 2004.12[民93.12] |
頁 次 | 頁113-120 |
分類號 | 446.8924 |
關鍵詞 | 快速模具; 矽膠模具; Rapid tooling; Silicon mold; |
語 文 | 中文(Chinese) |
中文摘要 | 以目前3C產業情況來看,其產品大都朝向輕量化、質感化、平價化等特性來提昇消費者的購買意願。因此要符合以上條件,就必須要有完善的產品設計與市場評估,另外就是要降低生產的成本。而在降低生產成本中,模具的開發與其相關製程亦是關鍵之一,如何選擇適當的模具勢必是重要的一環。因此若能採用快速模具技術,將可在更短時間內做出樣品以供測試,亦或進行中、小量化的生產。本研究即是利用矽膠模具來翻製一3C感測元件作為載具,並探討其相關製作步驟與方法。經實驗後獲得以下幾點結論: 一、製作快速模具時須注意其灌模時間、割模技巧、注料比例等細節,方能製作出成功的模具。 二、製作薄殼件類型的注型品時,參考本實驗求出之最佳化參數來製作,應可做出較佳的成品。 三、目前3C產業產品,多趨向於小量且細緻化發展,因此使用快速模具來製作是非常合宜的,且較符合經濟成本。 |
英文摘要 | In the 3C industries, the demands of light-weight, high quality and low cost of products are needed to attract the purchasing desire of consumers. The completed product designing, market evaluation and cost-down of production are required to fit these demands. The development of mold and related manufacturing procedures are critical to decrease the cost of production. How to select a suitable mold is becoming more and more important. The rapid tooling technique can produce testing pieces within short time. It can be also used to mass production in small or medium scale. In this study, the silicon mold were employed to produce a 3C sensor device, related manufacturing procedures and methods were also investigated. The following conclusion are addressed: 1. The molding time, mold cutting technique and ratio of materials injection of rapid tooling must be well taken care of to produce a mold successfully. 2. The optimal parameters achieved in this study should be applied to make the thin shell molds. 3. Since the 3C products are becoming small quantities and more precise in shapes, the rapid tooling technique is suitable to produce the silicon mold economically. |
本系統中英文摘要資訊取自各篇刊載內容。