頁籤選單縮合
題 名 | 時間與動作研究用於礦場重機械技能檢定標準時間之訂定=Applying Time and Motion Study on the Time Standard Setting for the Massive Mining Machine Skill Test of the "National Skill Competition and Certification" System |
---|---|
作 者 | 周榮輝; 翁祖炘; | 書刊名 | 鑛冶 |
卷 期 | 48:3=187 2004.09[民93.09] |
頁 次 | 頁117-123 |
分類號 | 452.4 |
關鍵詞 | 重機械; 技能檢定; 目視機具檢查; 檢定時間; Heavy machine; Skill test; Checking machine by view; Testing time; |
語 文 | 中文(Chinese) |
中文摘要 | 重機械挖掘機檢定「目視機具檢查」之「標準時間」研究。及參考泰勒之間研究及吉爾勃斯夫婦之動作研究。 1.密集抽樣法:為一種事後測定方法,以十位操作人員樣本試作,紀錄其「觀測時間」,評比修正為「正常時間」,再依寬放時間「寬放」成「標準時間」。 2.報時間測定法:為一種不透過直接測時,而採預先制定工作所須之正常時間的一種標準時間測定法,加上「動素」之TMU值、即為「標準時間」。 3.抽樣統計法:近兩年技能檢定抽樣之平均時間值。 本項檢定標準時間之研究,可提供相關職類技術士技能檢定、訂定標準時間之以參考模式或依據。 |
英文摘要 | An analysis on both paper test and skill test are made. And the “Check machine by view” held at test station for excavator operator is observed as the sample of the “Standard Time Research”, referring to the “Time Study” by Fredick W. Taylor and the “Motion Study” by Frank and Lilian Gilbreth. 1. Intensive sampling: a measuring method done after operation test. Takes ten operators as samples and the “Observed Time” is recorded and revised into the “Normal Time”. Then, the “Standard Time” is is obtained by correcting the “Normal Time” with an acceptable deviation. 2. Method time measurement: a method not by direct measurement, but preset the “Normal Time” with “MTM”. And the “Standard Time” is obtained by correcting the TMU of “Variable Factor”. 3.Sampling statistics: the man time value is based on last two years’ data of “National Skill Competition”. The results obtained may work as a basis or a reference to the relative test under the “National skill Completion and Certification” system. |
本系統中英文摘要資訊取自各篇刊載內容。