查詢結果分析
來源資料
相關文獻
- 田口方法應用在BTA深孔鑽削之真圓度誤差分析
- 未結合雙層複合板冷熱間結合軋延製程參數工程最佳化實驗設計之研究
- Considering the Cost in Mixture Experiments with Process Variables for Problems with Two Responses Occurring in Two-Phase Production Lines
- 精細金屬蝕刻技術之黃光微影製程最佳化
- 雙入口供氣法之質子交換膜燃料電池性能研究
- 利用田口方法探討腹部X光攝影條件之最佳化
- 灰關聯田口法於鋁合金熱處理製程參數最佳化之探討
- 覆晶構裝受熱循環負載作用之疲勞壽命分析與探討
- ANOVA應用於震盪式熱管之預測與分析
- 主成份田口法於A6061之預時效製程最佳化研究
頁籤選單縮合
題名 | 田口方法應用在BTA深孔鑽削之真圓度誤差分析=Application of Taguchi Methods in the BTA Deep Hole Drilling on the Roundness Error Analysis |
---|---|
作者 | 鄧琴書; Deng, Chyn-shu; |
期刊 | 聯合學報 |
出版日期 | 200307 |
卷期 | 23 2003.07[民92.07] |
頁次 | 頁127-136 |
分類號 | 446.894 |
語文 | chi |
關鍵詞 | 田口方法; BTA深孔鑽削; 控制因子; 真圓度誤差; 變異數分析; Taguchi methods; BTA deep hole drilling; Control factors; Roundness error; Analysis of variance; |