查詢結果分析
相關文獻
- Effect of Electrolyte Composition on Ni-Fe Deposition in LIGA Process
- 脈衝電鑄奈米級鎳鐵合金特性與微結構研究
- Optimizing Pulse Current Electroforming for Ni-Fe Micro-Mold Insert Using the Taguchi Method
- 微結構之合金電鑄技術
- Composite Electroforming Applied for LIGA Process
- 電鑄技術應用在滾筒製作上之研究
- 一種模具快速製作的方法
- 精密電鑄鈷鎳合金之工程研究
- 玻璃槽窯用熔鑄磚 (電鑄磚)
- 電鑄條件對鈷鎳合金鑄膜特性之研究
頁籤選單縮合
題名 | Effect of Electrolyte Composition on Ni-Fe Deposition in LIGA Process=電鍍液成份對LIGA程序中電鑄鎳鐵合金的效應探討 |
---|---|
作者姓名(中文) | 劉道奇; 王詠雲; 萬其超; | 書刊名 | Journal of the Chinese Institute of Chemical Engineers |
卷期 | 34:1 2003.01[民92.01] |
頁次 | 頁107-113 |
分類號 | 472.16 |
關鍵詞 | 鎳鐵合金; 微系統工程; 鎳鐵合金鍍液; 電鑄; Electrolyte surface tension; Nickel iron plating; |
語文 | 英文(English) |
中文摘要 | 本文在闡述微系統工程(MEMS),鎳鐵合金鍍液的表面張力對電鑄微結構性質的影響。在高深寬比(深210μm,寬度僅有7μm)的微孔內進行電鑄程序,可以製造出鎳鐵合金的微結構。結構的內應力與表面完整性會受到鍍液內界面活性劑以及電流密度所影響。藉由界面活性劑的添加輔以控制適當的電流密度,即可藉由電鍍本身所伴隨的析氫反應,來促進微孔內的流動性質,用以減少微孔內由於電化學反應所造成的pH值變化。 |
英文摘要 | The effect of electrolyte's surface tension on Ni-Fe codeposition for MEMS application was studied. A nickel-iron microstructure was obtained inside high-aspect-ratio(210μm deep with 7μm width) microchannel. The internal stress and surface defect of the alloy microstructure are influenced by the presence of surfactant and applied current. Uniform distribution of deposit inside microstructure can be achieved by choosing proper current, surfactant and optimal control of hydrogen evolution reaction which can induce agitation and mitigate pH variation during electrodeposition. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。