查詢結果分析
來源資料
相關文獻
- 不同硬化製程製備高分子分散液晶膜的特性研究
- 膜厚、環氧樹脂/硬化劑當量比及冷卻方式對高分子分散液晶複合膜光電性質之影響
- 逐步硬化製程製備高分子分散液晶膜的特性
- A Study of Electro-Optic Properties for Polymer/Ferroelectric Liquid Crystal Composite Films
- NEMATIC 高分子液晶﹣﹣低分子液晶複合系相容性的光電特性
- 新型聚胺基甲酸酯(PU)合成及其液晶複合膜之結構與血液相容性研究
- 液晶顯示器可視角量測探討
- 中國機讀編目格式的相容性
- 棉蚜小蜂在三種洋香瓜品種上之發育、繁殖、氣味偏好及對棉蚜族群之影響
- 液晶投影顯示器發展趨勢
頁籤選單縮合
題名 | 不同硬化製程製備高分子分散液晶膜的特性研究=Characteristics of Polymer Dispersed Liquid Crystal Film Prepared by Three Different Curing Processes |
---|---|
作者 | 許美緣; 萬明安; 葉昆泰; 郭榮華; 蕭明達; | 書刊名 | 嘉南學報 |
卷期 | 28 2002.11[民91.11] |
頁次 | 頁85-95 |
分類號 | 467 |
關鍵詞 | 液晶; 相容性; 驅動電壓; 回火; 對比度; Liquid crystal; Miscibility; Threshold voltage; Quench; Contrast ratio; |
語文 | 中文(Chinese) |
中文摘要 | 本研究主要的目的在於探討不同加工方式對環氧樹脂高分子分散液晶膜(PDLC)之電光性質及液晶微滴型態之影響,以三種不同當量比之環氧樹脂與熱硬化劑,藉由偏光顯微鏡(POM)觀察PDLC膜之組成物中的液晶相分離型態學,並討論液晶與樹脂基材之間的相容性,再以不同加工方式製成PDLC膜,測量其電光性質(□、□、□)。結果發現當未施加電壓時,PDLC膜呈現乳白色,當施加電壓高於驅動電壓時,PDLC膜立即轉變為透明狀態。實驗中發現,在環氧樹脂與熱硬化劑當量比為1:1.5,並以回火方式冷卻所製成的PDLC膜,可獲得較小的驅動電壓及較佳的對比度。因此此顯示膜可應用於電子顯示及光控制元件上。 |
英文摘要 | We study the effects of different curing processes on the electro-optical properties and morphology of liquid crystal droplets. In this study, the phase diagram and POM (Polarized Optical Microscopy) are used to understand the miscibility of liquid crystal and epoxy resin, and the phasing out of the liquid crystal in the film as well. UV/Visible photometer is utilized to measure the electro-optical properties of the PDLC film obtained through the various processes. It is found that the PDLC film remains opaque when uncharged. As the applied voltage is higher than the threshold voltage, the film is turning into clear. In equivalent weight ratio of Epoxy/curing agent being 1/1.5, the PDLC prepared using quenching method has a low threshold voltage and better contrast ratio. This PDLC film can be utilized in making display and optical devices. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。