查詢結果分析
相關文獻
- 非破壞性檢測方法評估預設缺點對杉木粒片板性質之影響
- 混凝土非破壞性檢測中激發頻率與非均勻介質尺寸對P波波速的影響
- 杉木粒片板與工廠廢料粒片板之性質比較
- 木材長度對應力波傳遞速度與振動頻率之影響
- 應力波非破壞測定法檢測木質板材之異方性
- 木材含水率對應力波傳遞速度與振動頻率之影響(2)
- 表面波譜法應用於壩體土壤剪力波速剖面量測之研究
- A Three-Dimensional Vp Model of the Southeastern Taiwan Area and its Tectonic Implications
- Velocities of Pn-Waves in the Taiwan Strait and its Surrounding Area from Regional Earthquakes
- 由超音波速評估高性能混凝土抗壓強度品質
頁籤選單縮合
題 名 | 非破壞性檢測方法評估預設缺點對杉木粒片板性質之影響=Effects of Predesigned Defects on the Properties of China-fir Particleboard Evaluated by Nondestructive Testing Methods |
---|---|
作 者 | 陳載永; 楊善復; 陳合進; | 書刊名 | 林業研究季刊 |
卷 期 | 24:1 2002.03[民91.03] |
頁 次 | 頁59-74 |
分類號 | 436.18 |
關鍵詞 | 粒片板; 預設缺點; 非破壞性檢測; 波速; 振動頻率; Particleboard; Predesigned defects; Nondestructive testing; Wave velocity; Vibration frequency; |
語 文 | 中文(Chinese) |
中文摘要 | 以應力波計時儀(Stress Wave Timer,SWT)及打音頻譜分析系統(Tap Tone Analysis System,TTAS)與振動頻率測定器(Vibration Frequency Tester,VFT)等三種非破壞性檢測儀器,檢測含有外來夾雜物、含水率不均及板密度不均的杉木粒片板。在添加5%金屬屑及砂粒之外來夾雜物於杉木粒片板之板坯的中央或環狀位置,此預先設計之缺點,以應力波計時儀、打音頻譜分析系統及振動頻率測定器等三種非破壞性檢測系統及破壞性檢測技術,未能發現缺點的存在;然而板密度不均及板坯含水率不均之缺點,可經由非破壞性及破壞性兩種檢測系統查覺之,並且其相關性極高。 |
英文摘要 | During the China-fir particleboard making, predesign to add 5% extraneous metal particles or gravel sand, which concentrated in the center or in ring form of the mat. This defects of panels under recent testing methods could not clear find out, neither by nondestructive testing methods such as stress wave timer (SWT), tap tone analysis system (TTAS) and vibration frequency tester (VFT), nor by destructive testing method such as universal testing machine. Otherwise the uneven forming and uneven moisture content of mat influence the properties of China-fir particleboards obviously, it could be found by both testing systems (non-destructive and destructive testing) the results showed high relationships. |
本系統中英文摘要資訊取自各篇刊載內容。