查詢結果分析
相關文獻
- The Fabrication and Characterization of PZT Thin Film Acoustic Devices for Application in Underwater Robotic Systems
- XRD Analysis of PZT Thin Films on Si Substrates by Rapid Thermal Annealing Processes
- Fabrication and Characterization of PZT thin Film Ultrasonic Devices
- 訪國科會工程處海工學門召集人李雅榮談我國海洋工程技術的研發概況
- 傳統加工產業活化與水下技術發展
- 訪財團法人國家政策研究基金會政策委員海軍退役中將蘭寧利將軍--談我國海洋戰略與國防科技
- 洞悉產學研跨界成就 海洋無人技術新里程
- 臺灣海域沈船記錄之分析
- 水下技術應用在定置網漁業與海洋箱網養殖產業之探討
- 臺灣的海洋工程與相關產業
頁籤選單縮合
題名 | The Fabrication and Characterization of PZT Thin Film Acoustic Devices for Application in Underwater Robotic Systems=水下技術所用鋯鈦酸鉛薄膜聲波元件的製作和量測 |
---|---|
作者姓名(中文) | 張忠誠; 王榮華; 鄭慕德; 林鎮洲; 陳國雄; | 書刊名 | Proceedings of the National Science Council : Part A, Physical Science and Engineering |
卷期 | 24:4 2000.07[民89.07] |
頁次 | 頁287-292 |
分類號 | 448.551 |
關鍵詞 | 水下技術; 鋯鈦酸鉛薄膜; 水中聲波元件; PZT thin film; Acoustic devices; Underwater technique; |
語文 | 英文(English) |
英文摘要 | A high frequency spectrum lead zirconate titanate (PZT) thin film acoustic device was fabricated and studied for application using an underwater technique. The radio frequency (RF) planar magnetron sputtering method was used to deposit PZT thin film .The deposited PZT thin film IC (integrated circuits) fabrication processes were used to fabricate the acoustic devices. The optimized annealing conditions were 650? and 20 min for PZT thin film deposited at 350? for 2 h. The obtained PZT thin film had a dielectric constant of 869, a free dielectric constant eT33 of about 893, a dielectric loss of 0.3, a concorcive electric field of 0.061 KV/cm, a piezoelectric constant d33 of 2.03 pm/V, a piezoelectric constant g33 = d33/eT33 of 2.57 ?10? vm/N and a polarization level of 112.5 nC/cm. The fabricated PZT thin film acoustic devices can be used as transmitters on receivers. The highest levels of transmission sensitivity and receiving sensitivity, which can be obtained, are 76 dB and ?5 dB, respectively. The acoustic device has better performance when poled PZT thin film is used. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。