查詢結果分析
來源資料
相關文獻
- 輪機葉片組失調振動之定性分析
- 汽機葉片的振動特性研究--有限元素模式分析與模態測試之比對
- A Quadrilateral Thin Shell Element Formulation for Fan Blade Vibrations
- Friction Induced Self-Excited Vibration in Dry and Lubricated Sliding Contact
- 矩形條狀填充槽溝對表面波振動之阻隔效應
- Aerodynamic Forces on Two Stationary and Oscillating Square Prisms in Tandem and Side by Side Arrangements
- HF/6-31G[fec8]ab initio分子軌域法對(SiH[feaf])[feb8]M[feb2]分子(M=P,Al,As或Ga)理論計算研究
- 迴轉機械轉軸之漩渦及拍擊振動現象研究
- 不同握拍緊度對手臂振動之影響
- 精密機械之振動環境研究
頁籤選單縮合
題 名 | 輪機葉片組失調振動之定性分析=Qualitative Analysis for Mistuned Blade Vibration |
---|---|
作 者 | 李廣齊; 李廣治; | 書刊名 | 技術學刊 |
卷 期 | 15:2 2000.06[民89.06] |
頁 次 | 頁261-266 |
分類號 | 446.0131 |
關鍵詞 | 失調振動; 輪機葉片; 振動; Mistuned; Blade; Turbomachinery; Vibration; |
語 文 | 中文(Chinese) |
中文摘要 | 振動在輪機葉片破裂的問題上具有相當重要的影響。自1960年代以來,多項研究發現,由於製造精密度的有限,使葉片間特性存有些許差異,而此些許差異會造成振動反應上顯著的不同。這現象稱為為失調振動。以往失調振動的研究多以統計的方法對反應振幅做定量的分析,卻沒有對於何種情況下會產生最大振幅而使葉片破裂的問題做定性分析。本研究乃用一連續環模型以模擬複雜的離散葉片組,其中用單一的偏微方程式取代聯立常微方程組,並利用微擾法對自由振動作定性分析,其所預期的模態分裂現象與一般觀察所得結果相當吻合。最後在強制振動方面,以模態分析探討可能發生之最糟振動情況,於預測與避免葉片破裂方面提供可行之對策。 |
英文摘要 | Ever since the 1960s, people have observed that even when the to blade. This is identified as the mistuned vibration problem for blade variation of properties between blades in small in a blade disk, the vibration response can be quite different from blade disks. Most of the work on this problem has adopted statistical methods for quantitative analysis of forced response without answering in what circumstances maximum amplitude will happen. In this paper, by adopting the continuous ring model and perturbation analysis for free vibration, the authors show the reason for and the importance of the modes split phenomena. Also, through the modal analysis of forced vibration the authors show possible way to predict and prevent the worst case, cracking blades. |
本系統中英文摘要資訊取自各篇刊載內容。