頁籤選單縮合
題名 | 二號高爐熱風爐爐頂連接管耐火磚修補作業=The Repair Work on the Dome Connection Pipe of Hot Stove at No.2 BF |
---|---|
作者 | 林詩舜; | 書刊名 | 技術與訓練 |
卷期 | 24:1=194 1999.02[民88.02] |
頁次 | 頁47-52 |
專輯 | 煉鐵專集:高爐 |
分類號 | 454.89 |
關鍵詞 | 熱風爐; 爐頂連接管; 暫時性修補; Hot stove; Dome connection pipe; Temporary repair; |
語文 | 中文(Chinese) |
中文摘要 | 二號高爐採用Krupp Koppers型式的外燃式熱風爐,三座熱風爐由IHI設計及監 造於71年完工。#21熱風爐爐頂連接管膨脹接頭區域鐵殼於78年首度發現熱點,採用灌漿 方式控制鐵殼溫度在350℃以下。85年6月#21熱風爐爐頂連接管鐵殼溫度突升至700℃,由 灌漿孔觀察一些區域的保溫磚、火黏土磚及矽磚已崩落,因此緊急由灌漿孔噴入氮氣冷卻及 於內部耐火磚安裝測溫裝置由高爐控制室監控,並委託日本Shinagawa人員於85年8月內視 鏡詳細檢查並於85年12月實施暫時性修補,修補後鐵殼溫度已降為200℃。 |
英文摘要 | Three sets of external combustion type hot stoves at No.2 BF were designed and built by IHI under license of Krupp Koppers in 1982. The hot spot occurred for the first time at expansion joint section on dome connection pipe of No.21 HS in 1989. The shell temperature of No.21 HS dome connection pipe was measured 700℃ in June 1996. In some area, it can be observed from the injection holes that insulation, fire clay and silica bricks fell off. In this critical period, N2 injection for sealing and cooling was adopted through the nozzles on shell and temperature monitoring of inside brick was in trend control. Endoscope inspection in detail in August 1996 and temporary repair in December 1996 were both conducted by Shinagawa people. Subsequently, the shell temperature had dropped down to 200℃ after repair. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。