查詢結果分析
來源資料
相關文獻
- 輕量型多孔質複合材料之最適化結構
- 超細纖維織物縫紉性之研究
- Stress Distribution of I-beam Fabricated with China-fir Lumber in Taiwan
- 臺灣栽植柳杉之栽植距離對其密度與數種強度性質之影響
- 實木彎曲性指標係數之探討
- 不同織物結構對麻纖維織物補強複合材料之彎曲性質和衝擊性質的影響
- 熱定型作用對編織彎曲性狀的效應
- Structural Performance of Roof Trusses Assembled with Japanese Cedar Lumber Using Nailed Steel Gussets
- 異樹種集成樑彎曲性質之研究(第1報)--彎曲彈性係數
- 異樹種集成樑彎曲性質之研究(第2報)--彎曲強度性質
頁籤選單縮合
題 名 | 輕量型多孔質複合材料之最適化結構=The Optimal Structure for Lightweight Porous Composites |
---|---|
作 者 | 戴國政; 楊錦成; 周俊宏; | 書刊名 | 鑄工 |
卷 期 | 24:2=97 1998.06[民87.06] |
頁 次 | 頁69-76 |
分類號 | 440.34 |
關鍵詞 | 多孔質複合材料; 三明治型複合材料; 彎曲性; Porous composites; Sandwich composites; Bendability; |
語 文 | 中文(Chinese) |
中文摘要 | 本研究參照 CNS 一般鋁材架高地板彎曲試驗規格,根據多孔質複合材料之特有性 質進行架高地板抗彎曲試驗,採討其變形及相關之機械性質:檢討多孔質複合材料之平板抗 彎曲性及變形撓度值, 以建立最適化之複合製程。 茲將本研究所得之重要結果整理如下: (1) 多孔質複合材料之最大平板抗彎曲荷重會隨著總厚度的增加而增加。(2) 就強化材料種 類而言,A11050 比 SUS304 更適合做為多孔質複合材料之表面強化材料。 (3) 本研究之孔 質複合材料結構, 其可達到 115OKgf 之最大平板抗彎荷重,在 300Kgf 彎曲荷重時之變形 撓度值為 1.7mm,滿足 CNS10678 A2171 300 型鋁合金架高活動地板之試驗規格,深具未來 開發潛力。 |
英文摘要 | The study is accordance with the specification of CNS floating floors bending-test. According to the characteristics of porous composites, proceed the floating floor bending test, and discuss the deformation and relative mechanical properties. To establish the optimal manufacture process, the result of our research will be mentioned as the following items: (1)The maximum floor bending strength of porous composites will increase as the total thickness. (2)For the kinds of reinforced materials, A11050 is more suitable than SUS304 to be the reinforced material for porous composites. (3)The best compound floor structure that we recommend can pass the CNS 10678 A 2171 type 300 alloy floating floors standard bending test, so it has potential to be used in the future. |
本系統中英文摘要資訊取自各篇刊載內容。