查詢結果分析
來源資料
相關文獻
- 690合金銲件之龜裂敏感性研究
- Microstructural Aspects and Mechanical Properties of Alloy 690 Wedments Using I-52 and I-152 Weld Metals
- 同步次頻振盪於鎳基690合金之應力消除研究
- 石化業的新材料--鎳基690合金
- 英高鎳690合金銲接殘留應力模擬分析
- 800H與825鎳基超合金之銲接熱龜裂敏感性研究
- 輸出功率形式與保護氣體對鎳基690合金雷射銲接特性之影響研究
- 鋁合金2219與5083之銲接熱裂研究
- Study on the Electrochemical Polarization and Stress Corrosion Cracking Behaviors of Alloy 690 in 5M Chloride Solutions at 25℃
- 壓水式反應器二次側結構組件腐蝕劣化的防蝕研究
頁籤選單縮合
題名 | 690合金銲件之龜裂敏感性研究=The Investigation on Crack Susceptibility of Alloy 690 Weldments |
---|---|
作者姓名(中文) | 吳威德; 蔡政宏; 郭飛虎; 許偉勳; 孫儒宗; | 書刊名 | 核子科學 |
卷期 | 34:4 1997.08[民86.08] |
頁次 | 頁247-254 |
分類號 | 472.14 |
關鍵詞 | 690合金; 熱龜裂敏感性; 可調應變試驗; Alloy 690; Hot cracking susceptibility; Versatile varestraint test; |
語文 | 中文(Chinese) |
中文摘要 | 本研究係以鎳基690合金為母材,並針對Inconel 82與Inconel 52兩種銲材進行 銲接熱龜裂敏感性評估,同時說明本研究所使用的銲接熱龜裂敏感性的測試方法,並探討 兩種銲材的銲接特性與此合全銲件的顯微組織、化學成分分析與硬度的分布狀況。利用T G-MA-JIG可調應變試驗機進行銲接熱龜裂敏感性試驗,其結果顯示Inconel 82銲材的熱龜 裂敏感性較大:而銲進於凝固退程最易發生凝固龜裂,其次為熱影響區的液化龜裂,再其 次為銲道與熱影響區的低延性龜裂。 |
英文摘要 | Alloy 690 was used as a matrix in this investigation. The attention was focussed on hot cracking susceptibility in welding of Inconel 52 and Inconel 82 filler metals. The welding characteristics, microstructures, chemical compositions, and hardness distribution of two kinds of filler metals were discussed. After TIG-A-MA-JIG Versatile Varestraint test, it showed Inconel 82 filler metal had a larger hot cracking susecptibility. It was more easier to occur solidification crack in the weld bead, then liquation crack in the heat affect zone and ductility-dip crack in the weld metals or heat affect zone. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。