查詢結果分析
相關文獻
- 製香作業環境粉塵與重金屬分佈特性之研究
- 金屬製品製造業作業環境粉塵分佈特性之研究
- 由鎘及鉛存在形態來探討萃取法及電動法土壤復育效率
- Chlorides Affecting the Speciation and Partitioning of a Single Heavy Metal in a Waste Incineration Process
- 屏東市營建及道路工程懸浮微粒之監測與成份分析
- 地理統計預測污染土壤中重金屬的空間分佈(2)--採樣方式之探討
- The Dry Deposition of Mass, Metal and Anions Specied in Taichung, Taiwan
- 模擬都市垃圾焚化過程無機氯對重金屬物種形成及濃度分佈之研究
- 運用有限混合分佈模式於北投關渡地區土壤重金屬污染空間變異分析
- 利用水噴霧系統抑制刨路作業環境之粉塵與結晶型游離二氧化矽
頁籤選單縮合
題名 | 製香作業環境粉塵與重金屬分佈特性之研究=The Characteristics of Aerosols and Heavy Metal Distribution in Incense Industry Operating Environments |
---|---|
作者 | 徐櫻芳; 楊心豪; 黃筱茜; 洪粕宸; 羅金翔; 林書賢; 林冠君; 楊心豪; Hsu, Ying-fang; Yang, Shin-hao; Huang, Hsiao-chien; Hung, Po-chen; Luo, Chin-hsiang; Lin, Shu-hsien; Lin, Kuan-chun; Yang, Shinhao; |
期刊 | 勞動及職業安全衛生研究季刊 |
出版日期 | 20160900 |
卷期 | 24:3 2016.09[民105.09] |
頁次 | 頁258-268 |
分類號 | 412.78 |
語文 | chi |
關鍵詞 | 製香作業環境; 總粉塵; 可呼吸性粉塵; 分佈; 重金屬; Incense industry; Total suspended particulate; Respirable particulate; Heavy metal; Distribution; |
中文摘要 | 本研究主要針對製香作業環境進行空氣中粉塵與重金屬之調查,包括現場環境因素特性、粉塵濃度及重金屬成分分析等,本研究選取5家製香作業場所進行實地採樣分析,利用個人採樣器搭配總粉塵(CLA4002)與可呼吸性粉塵(CLA4001)之採樣匣,進行粉塵採樣,重金屬分析則是參考CLA3011(砷等元素ICP採樣分析方法)之建議方法進行分析。研究結果發現,5家製香廠總粉塵的質量濃度平均值在1.96~2.32 mg/m^3之間;呼吸性粉塵的質量濃度平均值在1.23~1.96 mg/m^3之間皆低於現行法規之第四種厭惡性粉塵之容許濃度。在分區之總粉塵及可呼吸性粉塵濃度採樣結果可知,前置作業區與製香區是濃度較高區域。研究也發現大多製香廠之可呼吸性/總粉塵比例(%)皆大於60%,顯示作業人員受到之總粉塵暴露中,大部分屬於可呼吸性粉塵。由總粉塵與可呼吸粉塵內重金屬之成份分析可知,含量最高的重金屬為Zn及Ba。 |
英文摘要 | This work aims to investigate the characteristics of aerosols and heavy metal distribution in incense industry operating environments. The environmental factors, particulate matter concentrations, and heavy metal components would also be conducted in this work. Five incense plants have been selected as the test subjects. The total particulate concentration, respirable particulate concentration, and heavy metals components in the sampled dust would be measured by the suggesting methods of Institute of Occupational Safety and Health, Occupational Hygiene Division, Taiwan (CLA4002, CLA4001, and CLA3011). Experimental results showed that the average total particulate concentration and respirable particulate concentration were around 1.96~2.32 mg/m^3 and 1.23~1.96 mg/m^3. According to the data, the higher particulate concentrations were sampled in pre-operating area and incense-producing area. The ratios (respirable particulate concentration/total particulate concentration) in the most incense operating environments were greater than 60%. This finding indicated that operating workers were affected by the respirable-particulate exposure. Moreover, the heavy metals components in the sampled particulates and selected incenses were also measured, and the highest concentration of detected heavy metal were both Zn and Ba. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。