查詢結果分析
相關文獻
- 應用支援向量回歸建立製程/產品剖面資料之監控程序
- A Support Vector Regression Based Control Procedure for Detecting a Range of Unknown Mean Shifts
- 管制具群聚現象不合格點數之累和管制法
- X-管制圖條件管制界限之建構與分析--以AR(1)相關性資料為例
- 雙重EWMA管制法之設計研究
- Dual Shewhart Control Scheme for Monitoring the Autocorrelated Processes
- 區間管制圖之區間給分方法的研究
- A Control Chart Using Copula-Based Markov Chain Models
- A Study on Using the Moving Average Chart for Monitoring Time-between-Events
- 單邊累計合格數管制圖監控高良率製程之方法
頁籤選單縮合
題名 | 應用支援向量回歸建立製程/產品剖面資料之監控程序=Application of Support Vector Regression in Monitoring Process and Product Profiles |
---|---|
作 者 | 吳薏苓; 李虹葶; 鄭春生; | 書刊名 | 品質學報 |
卷期 | 21:3 2014.06[民103.06] |
頁次 | 頁189-203 |
專輯 | 永續卓越與服務創新 |
分類號 | 494.542 |
關鍵詞 | 剖面製程; 線性剖面; 支援向量回歸; 平均連串長度; Process profile; Linear profile; Support vector regression; Average run length; |
語文 | 中文(Chinese) |
中文摘要 | 在統計品質管制(SPC)中常使用管制圖監控製程,隨著製程複雜性的增加,若繼續使用單變量管制圖進行監控將會造成嚴重之誤判。在許多管制之應用中,只利用一個或數個品質特性並不足以描述一個物件之品質,因此需要一個反應曲線或剖面來描述物件之品質,通常可以用線性回歸模型做為剖面提供描述模型。對於某些製程而言,品質特性之間可能是獨立的或是彼此之間具有相關性,但剖面(proflle)製程之品質特性並非為單一分配之變數,而是一個函數。剖面是利用反應變數與一個或多個解釋變數間之關係所組成,而剖面製程之函數關係可呈現出線性、曲面以及離散等形式。然而在過去的研究中,對於剖面製程之監控仍採用管制圖進行監控。為了提升線性剖面製程之績效,本研究提出建構支援向量回歸(SVR)之監控系統進行預測。在績效評估方面,本研究使用平均連串長度(ARL)做為績效指標,並以文獻中所提出之方法為比較基準。本研究提出兩種不同之預測模型來監控線性剖面製程,並考慮四種不同偏移之型態(截距、斜率、誤差項變異數以及截距與斜率同時發生偏移),進而探討每一種型態在不同偏移程度下之監控績效。由研究結果顯示,以本研究所提出之監控方法,在不同偏移程度下均能有效地提升偵測績效。 |
英文摘要 | Statistical process control (SPC) has been successfully applied in a variety of areas. In some applications, it is usually assumed that quality characteristics can be adequately represented by one single measurement from an univariate or multivariate distribution of a vector formed by multiple measurements. However, in an increasing number of applications, there is an interest in monitoring multiple measurements constituting a line or curve. The quality of process control is characterized by the relationship between a response variable (y) and one or more explanatory variables (x), which is referred to as a profile. Thus, the profile monitoring process control detects and classifies the change occurred in a functional relationship of a process. The functional relationship of the profile can be presented by a linear, nonlinear or curve surface. In this paper we use support vector regression (SVR) to detect and classify the shifts in linear profiles. Each of the two different predict models based on support vector regression monitors the coefficients in a simple linear regression model of a profile, respectively. In performance evaluation, we use ARL criterion to assess the efficiencies of detecting shifts in linear profile data. After comparing with the traditional methods, the results of the proposed methods are better, which leads to enhancement in the monitoring performance. The main contribution of this research is enhancing the monitoring efficiency. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。