查詢結果分析
相關文獻
- 嬰兒車坐墊底座之射出模擬研究
- 杉木造林木生長應力對製材品翹曲之影響
- 優化流道系統設計解決洗衣機控制面板底座翹曲問題
- "鋸﹣乾﹣剖" 加工方法對降低3.5 cm相思樹板材翹曲之功效
- 電磁鋼片沖片翹曲成因探討
- Stacked CSP構裝之可靠度評估
- 包念副翹曲效應之平面曲線薄壁箱型樑元素
- 剛性舖面溫度分佈與翹曲應力
- Bridge Diaphragm Elements with Partial Warping Restraint for Horizontally Curved Steel Highway Bridges
- Causes of Warping of Door Cabinet Made from Oak Fancy Veneer Overlaid Plywood
頁籤選單縮合
題名 | 嬰兒車坐墊底座之射出模擬研究=Baby Seat Holder Mold Flow Analysis |
---|---|
作者姓名(中文) | 張旭銘; 劉柏辰; | 書刊名 | 機械技師學刊 |
卷期 | 6:4=24 2013.12[民102.12] |
頁次 | 頁1-8 |
分類號 | 467.6 |
關鍵詞 | 坐墊底座; 翹曲; 玻纖含量; Injection molding; Filling; Baby seat holder; |
語文 | 中文(Chinese) |
中文摘要 | 本研究以Moldex3D模流分析軟體進行嬰兒車坐墊底座不同材料之射出成型模擬,並利用射出的製程參數設定中,包括壓力、充填時間與保壓壓力來模擬,對翹曲、重量與玻纖含量來進行研究。 |
英文摘要 | In this experiment, we use Moldex3D software for injection molding simulation to get a better combination of process parameters, including pressure, filling and cooling for baby seat holder. Materials used PA6-35%-GF, PA6-50%-GF and MIM_316 to simulate. The results are shown the weight of the product is reduced while using PA6-35%-GF and PA6-50%-GF in this study. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。