查詢結果分析
來源資料
頁籤選單縮合
題名 | 同步加速器臺灣光子源超高真空系統設計=Design of the Ultrahigh Vacuum System for the Synchrotron Accelerator Taiwan Photon Source |
---|---|
作者 | 熊高鈺; 詹哲鎧; 張進春; 楊佳螢; 陳慶隆; 陳彥斌; 許憲能; 薛心白; 陳俊榮; Hsiung, Gao-yu; Chan, Che-kai; Chang, Chin-chun; Yang, Chia-ying; Chen, Ching-lung; Chen, Yen-bin; Hsu, Shen-nung; Hsueh, Hsin-pai; Chen, June-rong; |
期刊 | 真空科技 |
出版日期 | 20081200 |
卷期 | 21:3/4 2008.12[民97.12] |
頁次 | 頁12-19 |
分類號 | 449.3 |
語文 | chi |
關鍵詞 | 同步加速器; 臺灣光子源; 超高真空系統; |
中文摘要 | 位於我國新竹市科學園區之國家同步輻射研究中心 (NSRRC) 目前籌建中之能量 3.0 GeV 「台灣光子源 (Taiwan Photon Source ,簡稱 TPS)」第三代同步加速器為一座 2 nmrad 低發散度且產生臨界能量為 7.126 keV 之硬 X 光為主的高亮度光源設施,以彌補於 1993 年啟用運轉至今的 1.5 GeV「台灣光源」(Taiwan Light Source ,簡稱 TLS) 適合真空紫外光 (VUV) 與軟 X 光範圍(臨界能量為 2.142 keV) 而在較高能量硬 X 光之不足。此7年計畫於 2007 年啟動預定於 2013 年建造完成並試車啟用。TPS 光源產生之主體加速器為「電子儲存環」,在恆定電流400 mA 持續注射 (Top-up Injection) 電子束運行必須維持加速管內氣壓低於 1 nTorr 的超高真空度。電子軌道真空腔體採用鋁合金材料,可兼具低表面釋氣率、高熱導性、無殘留輻射、容易加工等優越性,以滿足真空腔控制尺寸精度、最佳超高真空度、運轉與維護高可靠度等需求,提供用戶連續使用固定高強度與亮度且穩定之 X 光束進行實驗研究。由於在國內可以完全掌握鋁合金超高真空腔之加工、清洗與銲接等製造技術,對於真空腔與元件之品質控制與系統維護等皆能自行管理,也相對提高 TPS 光源系統穩定運轉之可靠度;同時提升國內廠家製造技術及未來真空系統維護之自主能力。本文除了簡介台灣光子源超高真空系統設計概念外,並敘述超高真空腔之製造、抽氣幫浦之規劃、真空系統安裝與處理等步驟與考慮要點。 |
英文摘要 | A new third generation synchrotron accelerator named "Taiwan Photon Source (TPS)" located at the National Synchrotron Radiation Research Center (NSRRC), Hsinchu city, is a 7-years national project under construction in 2007 ~ 2013. The TPS, with energy of 3.0 GeV and emittance of 2 nmrad, provides a high brilliant broad band hard X-ray at the critical energy of 7.126 keV which compensates the range of higher photon energy which is insufficient for the existed 1.5 GeV Taiwan Light Source (TLS) with critical energy of 2.142 keV has operated since 1993. The electron storage ring to be operated at 400 mA of constant beam current by top-up injection needs an ultrahigh vacuum of pressure < 1 nTorr in the beam duct. The vacuum chambers for the beam ducts are made of aluminum alloy materials for their good properties of lower surface outgassing rate, higher thermal conductivity, no residual radiation, easily machining capabilities, etc. that fulfills the requirements of precise dimensional control, high operational beam stabilities, and high systematic reliabilities. The design concept, manufacturing processes, pumping configuration, installation and maintenance procedures, will be described in this paper. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。