查詢結果分析
來源資料
相關文獻
- Optimal JIT Production and Delivery Lot Size Model that Considers Vendor Reworking Process and Variable Setup Cost
- 考慮生產線空間限制及降低設置成本之整合性存貨模式研究
- 考慮前置時間與設置成本之整合性存貨模式
- 臺灣工業產出結構的演變: 1912-1990
- 多站報童決策問題之最佳存貨水準比較
- 考慮重工與不良率遞減之製程公差設計
- 多重工作假說方法
- 重工與品質損失成本極小化的製程公差設計
- 注意力限制與無氧閾值對大專拳擊選手心理動作表現之影響
- Deterministic Inventory Models for Deteriorating Items with Shortages and Two Warehouses
頁籤選單縮合
題名 | Optimal JIT Production and Delivery Lot Size Model that Considers Vendor Reworking Process and Variable Setup Cost=考慮重工與變動設置成本之最佳化JIT生產與運送批量決策模式 |
---|---|
作者 | 邱裕方; 張清陽; Chiu, Yufang; Chang, Ching-yang; |
期刊 | 工業工程學刊 |
出版日期 | 20090300 |
卷期 | 26:2 2009.03[民98.03] |
頁次 | 頁99-108 |
分類號 | 494.5 |
語文 | eng |
關鍵詞 | 存貨模式; 重工; 精實生產; 設置成本; JIT; Inventory model; Rework; Lean production; Setup cost; |
中文摘要 | 許多學者探討JIT採購與生產環境下的最佳經濟批量,也考慮到整合買方與賣方的總成本的模式,但是同時考慮到重工模式的文獻卻不多見。大部分關於最佳批量的研究所發展出的存貨模型都會假設條件爲理想的情況,不過在現實生產過程中必定會有不良品的產生,製造商通常也具備重工的能力,因此不良品產生後將再次進入製程加工而成爲完成品。一般存貨模式的生產率並沒有考慮不良率的存在,也甚至只是把不良率當成報廢,而將原生產率扣除不良率當作實際生產率,並沒有考慮到製造商重工的能力。因此本研究希望考慮生產的不良品率,並同時整合製造商重工的能力用以建立更符合實際生產情況的製造商的存貨模型。另一方面,過去的研究只著重在一次訂購多次運送的JIT採購,與僅生產必要批量的JIT生產這兩項特徵,卻忽略精實生產環境下會造成設置成本降低的影響。在精實生產的環境下,不斷改善的生產環境會使設置成本持續的降低,也同時影響最佳生產批量的決定,因此本研究提出重新計算最佳生產以及運送批量的方法。綜合以上兩個問題,本研究模式在整合買方與賣方的JIT生產與運送模式加入重工問題,並且提出精實生產導致設置成本變動的概念,以建構本研究模式找出最佳化JIT運送與生產批量。 |
英文摘要 | Since defective items are inevitably produced in an imperfect manufacturing process, the rework process is performed to convert those defective products into finished goods. This study proposes an inventory model that considers the defect rate to conform the real production environment. Additionally successful lean production is making various efforts and continuous improvements to continuously reduce setup cost, while the reduction of setup cost alters the optimal lot-size. This research thus considers changeable setup costs caused by the effect of lean production in making production and delivery lot-size decisions with minimum total cost in the JIT supply chain. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。