查詢結果分析
相關文獻
頁籤選單縮合
題 名 | Ultra-High Strength Steel Fiber Reinforced Concrete for Strengthening of RC Frames |
---|---|
作 者 | Wang, Yung-chih; Lee, Ming-gin; | 書刊名 | Journal of Marine Science and Technology |
卷 期 | 15:3 2007.09[民96.09] |
頁 次 | 頁210-218 |
分類號 | 441.557 |
關鍵詞 | Ultra-high strength fiber reinforced concrete; UFC; Strengthening; Beam-column joint; Shear resistance; |
語 文 | 英文(English) |
英文摘要 | ABSTRACT The modeling of dynamic material removal rate (MRR) control and the optimum solution with tool life determination through Calculus of Variations to minimize the machining cost of an individual cutting tool under expected machining quantity are introduced in this paper. To analyse the cutting forces under the MRR optimization, the mathematical model is formulated by reverse experiments on an ECOCA PC-3807 CNC lathe, and the electronic circuit is developed through linear regression technique for virtual machining. The inaccuracy between actual voltage and simulated voltage is assured to be within 2%. By introducing the real-world CNC (computerized numerical control) machining case from AirTAC into the virtual system, the simulated cutting forces are shown to promise the feasible applicability of the optimum MRR control. Additionally, the implementation of the dynamic solution is experimentally performed on our proposed digital PC-based lathe system. The surface roughness of all machined work-pieces is found to not only stabilize as the tool consumed, but also accomplish the recognized standard for finish turning. This study not only provides the economical solution of virtual machining prior to realization for the optimum MRR, but also advances the realistic implementation through digital PC-based lathe system to the CNC machining industry with profound insight. |
本系統中英文摘要資訊取自各篇刊載內容。