頁籤選單縮合
題名 | CAN-Bus節點電路於車用電動後視鏡之應用=Development and Application of CAN Controller and Receiver for Electronic Rear-view Mirrors in Vehicle |
---|---|
作者 | 許源鏞; 蔡汯嶧; Hsu, Yuan-yong; Tsai, Hung-yih; |
期刊 | 車輛工程學刊 |
出版日期 | 20070500 |
卷期 | 4 2007.05[民96.05] |
頁次 | 頁81-96 |
分類號 | 447.12 |
語文 | chi |
關鍵詞 | CAN-Bus通訊協定; 節點電路; ISO 11898; CAN 2.0B; CAN-Bus communication network; Node circuit; |
中文摘要 | 本文主要探討CAN-Bus通訊協定(CAN2.0B及ISO11898)及節點電路之設計與應用;文中針對CAN控制器與CAN收發器進行規劃、分析與設計,藉以選定適當的CAN節點電路,並應用於車用電動後視鏡上。 本研究採用Nissan Cefiro折疊式電動後視鏡,並於後視鏡上加裝電位計以進行位置回饋。CAN節點電路則是以Atmel之微控制器(T89C51CC01),搭配Infineon的收發器(TLE6250),整合製作完成。實驗結果顯示,使用CAN節點電路,進行電動後視鏡之控制,可符合新世代車身電子資訊通訊網路控制與電腦診斷之需求。 |
英文摘要 | This paper mainly aims at CAN-Bus communication protocols (CAN2.0B & ISO 11898) and develops node technology. Meanwhile we also develop CAN controller and receiver for electronic rear-view mirrors in vehicle. This research adapts Nissan Cefiro folding electronic rear-view mirror, and install potential meter to count and feedback the position of the rear-view mirror. We use Atmel microprocessor (T89C51CC01) to design node circuit, combine with Infineon transceiver (TLE6250). A desirable preliminary result has been achieved. The electronic rear-view mirror with CAN-Bus node, can accord with the CAN-Bus communication network as well as the PC-based diagnostic system. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。