查詢結果分析
來源資料
相關文獻
- 光纖有線電視系統半推挽式光接收機之設計與製作
- CSO Performance of Cascaded External Modulation and Directly Modulation CATV Transmitters
- 有線電視系統「半頻多工、550MHz直調式光發射機/光接收機」視訊模組電路設計與製作
- 有線電視系統「直調式光發射機/光接收機」視訊模組設計
- Nonlinear Distortion Analysis for Directly Modulated DFB Laser Diode in Fiber Optical CATV Systems
- 以可調適平衡式恆流源驅動雷射架構設計與製作光纖有線電視系統光發射機
- 光纖有線電視系統省電型光接收機之設計與製作
- 光纖到家、雙向系統/寬頻整體服務
- 有線電視系統「光發射機/光接收機」設計
- 光纖有線電視系統
頁籤選單縮合
題 名 | 光纖有線電視系統半推挽式光接收機之設計與製作=Design and Implementation of Half-Push-Pull Optical Receiver for Optical Fiber CATV System |
---|---|
作 者 | 洪鴻文; | 書刊名 | 技術學刊 |
卷 期 | 15:3 2000.09[民89.09] |
頁 次 | 頁495-502 |
分類號 | 448.88 |
關鍵詞 | 光纖有線電視系統; 半推挽式; 載波二次合成拍差比; Optical fiber CATV system; Half-push-pull; Composite second order; CSO; |
語 文 | 中文(Chinese) |
中文摘要 | 本文針對光纖有線電視系統中「半推挽式」光接收機之設計製作,進行探討與研究。光接收機之架構,設計上必須將檢光信號予以放大後輸出,常會因所使用放大器本身之“非線性效應”影響,直接造成光接收機輸出產生非線性失真現象。雖然已有文獻提出「推挽式」光接收機架構,藉以改善“載波二次合成拍差比”參數,但因其推挽式架構不僅使用的放大器數目必須多出一倍,其直流功率損耗亦伴隨增加一倍。為此,本文提出一「半推挽式」光接收機架構,以減少放大器數目,並降低直流功率損耗,經實際製作量測,並和傳統“單端輸出”以及“推挽式”架構作一性能比較後,可驗證得知本文所提「半推挽式」架構,除仍保留改善“載波二次合成拍差比”參數之優點外,在其所使用放大器數目和直流功率損耗上均可大幅且有效地降低。 |
英文摘要 | For an optical fiber cable television (CATV) system due to the non-linearity effect of amplifier, the signals after photodetection and amplification of the output of an optical receiver always suffer from nonlinear distortion. To solve this problem, a push-pull optical receiver has been developed to improve the performance of the composite second order (CSO). However, push-pull architecture requires more amplifiers and thus results in more DC power dissipation. In this paper, a half-push-pull architecture optical receiver is presented and compared with the conventional "single-ended output" and "push-pull" architectures. Experimental results indicate that the proposed half-push-pull architecture can not only preserve comparable performance with that of push-pull architecture, but also achieve significant reduction in DC power dissipation and hardware implementation cost. |
本系統中英文摘要資訊取自各篇刊載內容。