查詢結果分析
來源資料
相關文獻
- Zn-XAl-3Cu合金抗拉強度之韋伯分析
- Strength Evaluation of Cement Pastes with Kevlar Fiber Along with Epoxy Resin
- 鋁含量對Zn-XAl-3Cu合金高溫拉伸性質的影響
- 基地組織與合金元素對於片狀石墨耐熱鑄鐵高溫抗拉強度之影響
- 添加飛灰及爐石對混凝土工程性質影響之研究
- 溫度對Al-4.2Wt%Cu/0.3μmAl[feaf]O[feb0](p)複合材料機械性質之影響
- S17CK於高溫腐蝕後抗拉強度預估方法之研究
- 溫度對Al-4.2Wt%Cu/0.3 μmAl[feaf]O[feb0]複合材料機械性質之影響
- 聚酯纖維、廢料不腳混入水泥質材料抗拉強度試驗分析研究
- 聚酯不織布鍍鋁應用之研究
頁籤選單縮合
題 名 | Zn-XAl-3Cu合金抗拉強度之韋伯分析 |
---|---|
作 者 | 陳國俊; | 書刊名 | 南港高工學報 |
卷 期 | 17 1999.05[民88.05] |
頁 次 | 頁175+177-193 |
分類號 | 440.39 |
關鍵詞 | Zn-XAl-3Cu合金; 抗拉強度; 韋伯分析; |
語 文 | 中文(Chinese) |
中文摘要 | 本研究探討鋁含量對Zn-XAI-3Cu合金之抗拉強度變動的影響;利用三參數韋伯分佈函數分析抗拉強度變動數據,可了解不同鋁含量下Zn-XAI-3Cu合金的抗拉強度分怖狀況、破壞機率及破壞模式,並能推測其最小「抗拉強度壽命」。 研究結果顯示:隨著鋁含量的增加,Zn-XAI-3Cu合金之抗拉強度也隨著增加。Zn-XAI-3Cu合金抗拉強度之m值皆大於1,破壞模式皆屬於耗損破壞模式。這表示鋁含量與破壞模式之間無密切的關係。 |
英文摘要 | The influences of aluminum content on the tensil strength fluctuation behavior of Zn-XAI-3Cu alloys have been analysed by applying the three-parameter Weibull distribution function. By determining the parameters of this function, the tensil strength distribution, failuer probabilities, failure mode and minimum tensil strength life of Zn-XAI-3Cu alloys with different aluminum content were calculated and predicted. The study results show that the tensil strength of the Zn-XAI-3Cu alloys increases follow as the aluminum content increases. The m value of the Zn-XAI-3Cu alloys is greater than 1, the failure is wear-out failure mode. This is show that no intimate relationship between the aluminum content and failure mode. |
本系統中英文摘要資訊取自各篇刊載內容。