查詢結果分析
來源資料
相關文獻
- 鋁含量對Zn-XAl-3Cu合金高溫拉伸性質的影響
- 鋁片冷軋用油之特性需求及對鋁片表面品質之影響
- 鋁罐產業的新技術和新挑戰
- Weathering Sequence of Clay Minerals in Loamy Spodosols of Central Taiwan
- 臺灣森林土壤中鐵氧化物與鋁層間蛭石之生成機制
- θ至α-Al[feaf]O[feb0]相轉換的熱差行為特性分析
- 以θ→α-Al[feaf]O[feb0]相轉換的特性製備微粒α-Al[feaf]O[feb0]粉末之研究
- A356鋁合金與鑄鐵嵌件鑄造接合性質之研究
- 鹼浴添加有機酸鹽和使用直流電與脈衝電流對鋁材陽極氧化之研究
- Factors Affecting Surface Roughness in End Milling of AL2014-T6
頁籤選單縮合
題 名 | 鋁含量對Zn-XAl-3Cu合金高溫拉伸性質的影響 |
---|---|
作 者 | 陳國俊; | 書刊名 | 南港高工學報 |
卷 期 | 17 1999.05[民88.05] |
頁 次 | 頁63+65-79 |
分類號 | 440.39 |
關鍵詞 | 鋁; Zn-XAl-3Cu合金; 高溫拉伸性質; |
語 文 | 中文(Chinese) |
中文摘要 | 本研究探討不同鋁含量對Zn-XAI-3Cu合金高溫拉伸性質的影響;在50-300℃進行拉伸試驗,以獲得拉伸數據,藉此理解不同溫度下Zn-XAI-3Cu合金拉伸性質變動的狀況。 研究結果顯示:Zn-XAI-3Cu合金抗拉強度隨著溫度的升高則逐漸的下降。Zn-XAI-3Cu合金在不同試驗溫度下之抗拉強度:當溫度低於150℃時,以Zn-23ZAI-3Cu合金的抗拉強度較佳,但當溫度超過200℃時,Zn-23AI-3Cu合金的抗拉強度比Zn-6AI-3Cu及Zn-23AI-3Cu合金差。 |
英文摘要 | In this study, the influences of aluminum content on the tensile properties of Zn-XAI-3Cu alloys at elevated temperature have been analysed. The tensile test were performed under 50-300℃ tensile testing temperature, we realize the tensile properties fluctuation behavior of Zn-XAI-3Cu alloys under different temperature. The results reveal that the tensile strength of Zn-XAI-3Cu alloys decreases with increasing of temperature. The tensile strength of Zn-XAI-3Cu alloys under different testing temperature: the tensile strength of Zn-23AI-3Cu alloy is better when temperature below 150℃, but the tensile strength of Zn-23AI-3Cu alloy is worse than Zn-6AI-3Cu and Zn-23AI-3Cu alloy when temperature over 200℃. |
本系統中英文摘要資訊取自各篇刊載內容。