查詢結果分析
來源資料
頁籤選單縮合
| 題 名 | Appropriate Sizes of Porous and Solid Blocks for Heat Transfer Under an Impinging Jet=由熱傳觀點研究多孔性凸塊與固體凸塊於噴射衝擊流作用下之適當尺寸 |
|---|---|
| 作 者 | 傅武雄; 黃新鉗; | 書刊名 | 中國工程學刊 |
| 卷 期 | 20:2 1997.03[民86.03] |
| 頁 次 | 頁159-169 |
| 分類號 | 335.21 |
| 關鍵詞 | 多孔性凸塊; 固體凸塊; 噴射衝擊流; Porous block; Solid block; Impinging jet; |
| 語 文 | 英文(English) |
| 英文摘要 | 本研究以數值方法探討將多孔性凸塊或固體凸塊置於加熱區時,於噴射衝擊流作 用下之適當凸塊尺寸設計。 數值方法應用 SIMPLEC 法來求解統御方程式,而多孔性介質之 能量方程式則是採用配合 Van Driest 壁函數之單方程式熱傳模式。結果顯示較短的多孔性 凸塊與固體凸塊而言,均可獲得熱傳之增益;相反的結果則出現於較長之凸塊。在與無凸塊 之案例比較後發現對多孔性凸塊而言,存在有一適當尺寸可獲得最大的熱傳增益效果;然而 ,對固體凸塊而言,其熱傳增益之效果則是凸塊尺寸越短越好。 rous and solid blcok cases and decreasement of heat transfer occurs for longer block cases. Compared with the without block case, there exists an appropriate length of the porous block to gain the maximum thermal enhancement efficiency. As for the solid block case, as the length becomes shorter, the thermal enhancement efficiency becomes better. |
本系統中英文摘要資訊取自各篇刊載內容。