查詢結果分析
來源資料
頁籤選單縮合
| 題 名 | 斷路器控制回路之探討=The Study on the Control Circuit of Circuit Breaker |
|---|---|
| 作 者 | 鄭石洋; | 書刊名 | 台電工程月刊 |
| 卷 期 | 581 1997.01[民86.01] |
| 頁 次 | 頁31-38 |
| 分類號 | 448.26 |
| 關鍵詞 | 斷路器; 控制開關; 資訊末端設備; 裝甲開關箱; 保護電驛; 殘餘接點; Circuit breaker; C.B.; Control switch; C.S.; Remote terminal unit; RTU; Metal-clad switch gear; MCSG; Protection relay; PR; Slip contact; SC; |
| 語 文 | 中文(Chinese) |
| 中文摘要 | 變電所內斷路器的種類相當多,在變電所自動化工程裡,修改RTU對斷路器的控制 回路時,需配合各種不同的環境,而決定採用較合適的控制回路。大致上來說,可區分為直 接控制式回路與間接控制式回路兩種, 而在間接控制式回路中,需加裝輔助電驛 CX 及 TX ,和閂鎖電驛 SCX,其投入 / 啟斷的操作, 不能直接控制斷路器 52C.C. 及 52T.C. 線圈 ,必須透過 CX 及 TX 的接點來達成操作指令。本文係敘述 C.B. 之各種控制回路的情形, 並檢討各種回路的特性,希望能提供給大家參考,以期自動化工程能夠更順利進行。 |
| 英文摘要 | A large Variety of circuit breakers were used in Taipower's substation. It is necessary to modify the control circuit of the circuit breaker to fit with different circumstance, when the power system automation engineering is carried out. In general, there are two types of circuit. One is direct control type circuit, the other is indirect control type circuit,As for indirect control type circuit, Auxiliary relays CX and TX, and latch relay SCX should be added. This article try to study both kinds of control circuits. |
本系統中英文摘要資訊取自各篇刊載內容。