查詢結果分析
來源資料
第1筆 /總和 1 筆
/ 1 筆
頁籤選單縮合
題 名 | 牙科用奈米銀粉汞齊合金之可行性=The Feasibility of Dental Nano-amalgam Alloys |
---|---|
作 者 | 林育生; 蕭立殷; 鍾國雄; 杜正恭; | 書刊名 | 安泰醫護雜誌 |
卷 期 | 16:2 2010.06[民99.06] |
頁 次 | 頁61-72 |
分類號 | 416.98 |
關鍵詞 | 銀銅相奈米粉末; 奈米銀粉汞齊合金; 汞齊化反應; 腐蝕電位; 極化曲線量測; Ag-Cu nanopowder; Nanoparticle-doped dental amalgam; Amalgam reaction; Corrosion potential; Anodic polarization measurement; |
語 文 | 中文(Chinese) |
中文摘要 | 本研究將利用化學還原法製備奈米級銀銅相合金粉末並添加於市售牙科用銀粉汞齊合金粉末中,藉以製造奈米銀粉汞齊合金並提升銀粉汞齊材料之抗腐蝕特性。以市售的牙科用銀粉合金粉末(World-Cap(上標 ®))作為對照組,於市售粉末中分別添加5wt.%與10wt.%之銀銅相奈米粉末作為實驗組。實驗粉末分別利用X光繞射儀、穿隧式電子顯微鏡、掃描式電子顯微鏡以及電子微探儀進行特性分析。藉由穿隧式電子顯微鏡影像分析得知銀銅相奈米粉末的尺度平均約為30奈米。由能量分佈能譜儀定量銀銅相奈米粉末之成分別為56.28at.%的銀與43.72at.%的銅。添加銀銅相奈米粉末之汞齊的零電流電位較傳統市售汞齊材料較高,且在-325mV處並無發現由銀汞相與Cu6Sn5所貢獻的反應。此性質顯示市售汞齊填補材料之抗腐蝕特性可藉由銀銅相奈米粉末的添加而顯著提升。 |
英文摘要 | The aim of this study was to introduce Ag-Cu phase nanopowder as an additive to improve the corrosion behavior of conventional dental amalgams. A novel Ag-Cu nanopowder was synthesized by the precipitation method. An amalgam alloy powder (World-Cap(superscript ®)) was added and mixed with 5 wt.% and 10 wt.% of Ag-Cu nanopowders, respectively, to form experimental amalgam alloy powders. The original alloy powder was used as a control. Alloy powders were examined using X-ray diffraction, transmission electron microscopy (TEM), scanning electron microscopy and electron probe microanalysis. Amalgam disk specimens of metallurgically prepared were tested in 0.9% NaCl solution using electrochemical methods. The changes in the corrosion potential and anodic polarization characteristics were determined. The diameters of lamellar structure Ag-Cu nanoparticles were measured to be approximately 30 nm. The composition of the Ag-Cu nanoparticles determined by TEM-energy-dispersive spectroscopy was 56.28 at.% Ag-43.72 at.% Cu. A light-shaded phase was found mixing with dark Cu-Sn reaction particles in the reaction zones of Ag-Cu nanoparticle-doped amalgams. The Ag-Cu nanoparticle-doped amalgams exhibited zero current potentials more positive than the control and no current peak was observed at -325 mV that related to Ag-Hg phase and Cu6Sn5 phase in anodic polarization curves. The results indicated that the corrosion resistance of high-copper single-composition amalgam could be improved by Ag-Cu nanoparticle-doping. |
本系統中英文摘要資訊取自各篇刊載內容。