查詢結果分析
來源資料
相關文獻
- 電源轉換器之穩建設計
- 利用主成份分析與灰關聯分析進行多重品質特性之實驗
- 結合主成份與灰關聯分析法於油墨印刷參數最佳化之研究
- 放電加工製程參數最適化之研究
- 灰色田口法應用於蛋黃酥油酥皮生產最佳化之研究
- Solving Multi-Response Problems through Neural Networks and Principal Component Analysis
- Optimal Process Setting for Unbalanced Tolerance Design with Linear Loss Function
- 灰關聯田口法於鋁合金熱處理製程參數最佳化之探討
- 多品質特性系統應用智慧型實驗設計於小型水族箱養殖環境最佳化之研究
- Optimizing Reflow Thermal Profiling Using a Grey-Taguchi Method
頁籤選單縮合
題名 | 電源轉換器之穩建設計=Robust Design of Switch Power Supply |
---|---|
作者 | 楊素芬; 林佳瑩; Yang, Su-fen; Lin, Chia-ying; |
期刊 | 品質學報 |
出版日期 | 20050600 |
卷期 | 12:2 民94.06 |
頁次 | 頁101-111 |
分類號 | 448.25 |
語文 | chi |
關鍵詞 | 田口方法; 主成份分析; 灰關聯分析; 損失函數; Taguchi method; Principal component analysis; Gray theory; Loss function; |
中文摘要 | 產業在面臨全球化之競爭下,研發並創新好的產品品質以提升顧客滿意度和企業競爭力為一重要課題。 本研究主要以北縣某電子股份有限公司生產之電源轉換器 (Switch Power Supply) 為研究對象。電源轉換器在研發過程中時常發生零件溫度過高,導致無法通過國家安全規定或符合顧客需求的情形。經由現況了解、探討影響電源轉換器溫度過高的關鍵因素和實驗數據的收集後,本文分別採用田口方法、主成份灰關聯和期望損失結合主成份等三種方法進行分析,以決定有效降低電源轉換器溫升之最適零件組合。 最適零件組合經確認實驗後發現再現性良好,能有效降低各零件平均溫升5~10℃和溫升標準差3~6℃,使得各零件溫升符合國家安全規定,而且總不良率由現況的33%大幅降低為零。這些結果皆證實本研究可使產品品質大幅提升並降低損失。相信此類型產品改善後未來在市場佔有率和顧客滿意度上也皆能顯著提升。 |
英文摘要 | The design of switch power supply becomes finer and more delicate for satisfying customer expectation. However, decreasing the volume of switch power supply leads to an unacceptable temperature problem. The objective of the study is to solve this problem. In this paper, we design experiments to collect data and adopt three analysis approaches to determine the best treatment of the switch power supply parts. Finally, the best treatment we found could significantly reduce its average temperature, temperature variability, defective rate and increase the competitiveness of company. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。