查詢結果分析
相關文獻
- 田口式實驗計劃法應用於模具玻纖複合材之研究
- The Toughness Behavior of Fiber Reinforced Concrete
- 多軸多層經編織物和非織物強化不飽和聚酯積層板受非穿透性衝擊破壞之觀察
- 玻璃纖維強化塑膠管之介紹及其管系設計
- 玻璃纖維強化塑膠管之介紹及其管系設計
- 利用玻璃纖維改良紙張性質之探討
- 玻璃纖維紗管軸自動回收系統
- E-級玻璃纖維/環氧樹脂複合材料機械性質之研究
- A Study of Size Effect on the Strength of E-glass/Epoxy Structures
- Optimization of Injection Molding Process in Fiber Reinforced Polycarbonate Composites
頁籤選單縮合
題名 | 田口式實驗計劃法應用於模具玻纖複合材之研究=A Study on the Glass Fiber Composite for Molding by Taguchi Method |
---|---|
作者 | 邱兆千; 潘毅鈞; 黃耀立; 葉逸彥; Chiu, C. C.; Pan, Y. J.; Huang, Y. L.; Yeh, Y. Y.; |
期刊 | 華岡紡織期刊 |
出版日期 | 19970300 |
卷期 | 4:2 1997.03[民86.03] |
頁次 | 頁112-121 |
分類號 | 440.34 |
語文 | chi |
關鍵詞 | 水性酚醛樹脂; 玻璃纖維; 矽砂; 田口式實驗計劃法; Water soluble phenolic resin; Glass fiber; Silica sand; Taguchi method; |
中文摘要 | 本研究之複合材料是以水性酚醛樹脂、玻璃纖維和矽砂為材料,利用田口式實驗計劃法,針對八德重要參數酚醛樹脂、硬化劑、偶合劑、玻璃纖維、熱壓時間、熱壓溫度、壓力等進行規劃及實驗,藉由L�琲蔣等瑼礂@評估,以求得本研究之最佳組合參數。實驗結果顯示:加入30% 酚醛樹脂、5 PHR 硬化劑、5 PHR偶合劑、25 PHR 玻璃纖維、在30 kg/cm�替ㄓO、150 °C熱壓溫度、30分鐘熱壓時間,可得最佳之參數組合。 |
英文摘要 | In this investigation, Taguchi Method was used to process and prepare the composite, composed of water soluble phenolic resin, glass fiber and silica sand. There are gight parameters examined to determine the mechanical behaviors of this composite. These parameters are hot pressing time, hot pressing temperature, hot pressing pressure, the distribution of phenolic resin, curing agents, coupling agents and and content of glass fiber. The evaluations of L�� were used to obtain the feasitible operation conditions for molding. The results inedicate that the possible conditions for molding are 30 % phenolic resin, 5 PHR coupling agents and 25 PHR glass fiber, under the pressure of 30 kg/cm�� at the temperature of 150 °C for 30 min. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。