查詢結果分析
來源資料
頁籤選單縮合
題名 | 螺絲螺帽之鋼材選用=The Selection of Steel Materials for Fasteners |
---|---|
作者 | 呂南雄; 李博文; Lu, Nan-hsiung; Lee, Po-wen; |
期刊 | 金屬工業 |
出版日期 | 20000900、20001000 |
卷期 | 34:5 民89.09-10 |
頁次 | 頁58-63 |
分類號 | 446.863 |
語文 | chi |
關鍵詞 | 螺絲螺帽; |
中文摘要 | 臺灣螺絲螺帽業近年來發展極為迅速,至民國88年止全年出口已達100萬噸以上,相對於日本在民國87年,其螺絲螺帽全年出口量則不到20萬噸,臺灣已儼然成為世界最主要螺絲螺帽外銷國之一,而螺絲螺帽業亦成為鋼鐵工業的主要下游產業。 螺絲螺帽的主要原料為棒鋼及線材,目前在臺灣大部份由中鋼、豐興、燁興及嘉益等鋼廠供應,少部份由日本、俄羅斯、泰國等其他國家進口;由於其產品種類繁多,且各種品級對品質特性的要求也不一,因此一般使用之鋼材,有低碳鋼、中高碳鋼、低合金鋼、及不�袗�等。 目前臺灣螺絲螺帽業採用之成形加工方式,主要以冷鍛加工為主,此種加工方式具有1.生產速度快2.可節省材料3.可得到較佳的表面品質與精密度4.可得較優越的材質等優點,但冷鍛時所選用的鋼材與成形加工之難度以及螺絲螺帽的最終品質有極密切的關係,所以必須依螺絲螺帽的最終品質要求及成品加工特性而慎重的選擇適當的鋼材,本文就較常用之冷鍛螺絲螺帽所使用的碳鋼及合金鋼材料作一系統的介紹。 |
英文摘要 | The major forming method adopted to produce fasteners is cold heading in Taiwan with the following advantages: high speed productivity, less material consumption, better surface quality, high level of precision and superior quality of fasteners. The selected material has close relationship with the difficulties of cold forming process and the final quality required for fasteners. Therefore the appropriate material selected for fasteners must be based on these two characteristics. This paper introduces the carbon steel and alloy steel commonly used for fasteners and their appropriate selected methods. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。