查詢結果分析
相關文獻
- 應用田口方法於射膠螺桿之環式止逆閥最佳化設計
- Manufacturing Process Optimization of Short Glass Fiber Reinforced Polycarbonate Composites in Injection Molding
- 薄形光學讀寫頭致動器磁路最佳化設計
- 模糊田口方法於面銑刀具幾何形狀最佳化之研究
- 光學研磨機械運動參數之最佳化--田口方法
- 應用田口法於CD-ROM碟片托盤射出成型之製程最佳化開發
- 應用田口方法與模糊多準則Q分析於銲接參數最佳化
- Improving the Tap Coupler Optical Performance in the Fused Process by the Taguchi Method
- 平吹式散熱模組之連續應用田口法最佳化設計
- 應用Weierstrass定理及田口法於散熱模組之最佳化設計
頁籤選單縮合
題名 | 應用田口方法於射膠螺桿之環式止逆閥最佳化設計=An Optimal Design of Ring Type Check Valve in an Injection Screw by Using Tahuchi Method |
---|---|
作者 | 曾柏昌; 賴明煌; 邱顯俊; Tseng, Pai-chung; Lai, Ming-huang; Chiou, Shean-juinn; |
期刊 | 興大工程學報 |
出版日期 | 19990100 |
卷期 | 10:1 1999.01[民88.01] |
頁次 | 頁15-24 |
分類號 | 467.41 |
語文 | chi |
關鍵詞 | 過膠頭組; 射膠螺桿; 止逆閥; 田口方法; 最佳化; Screw tip assembly; Injection screw; Check valve; Taguchi method; Optimal design; |
中文摘要 | 射出成型製程中,溫度、射速、射壓及保壓等條件,對成品品質具有絕對的決定性。而過膠頭組是射出成型機械重要的塑化元件,對射出成型加工中成型精度條件如射速、射壓及保壓具有決定性的影響;由於研發簡單、成本又低,而且效益宏大。故本研究利用田口式實驗計畫法,針對在過膠頭組中具代表牲的-「環式止逆閥」設計,提出影響射出量精度之幾何參數,進行實驗計量量測與分析,以所獲致相關數據做最佳化過膠頭組設計,實驗證明以此方法設計之過膠頭所生產之產品計量精度準確。 |
英文摘要 | Injection molding processes is controlled with temperature, injection speed, injection pressure and holding pressure to approach the high quality. The function of the assembling of the injection molding screw head is very important for pressure control during operations. The research effort on the injection molding screw head is guaranteed to improve forming mold accuracy with minimal cost. In this research, Taguchi method is used in designing the typical injection modeling named ring-type check valve. The possible geometric parameters that could influence part accuracy are discussed. With empirical studies by using Taguchi experimental method, the optimal condition is decided that provides the relative information for manufacturing. The experimental results reveal that the optimal design for the ring type check valve has superior performance over the conventional design. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。