查詢結果分析
來源資料
頁籤選單縮合
| 題 名 | 自動式百香果種苗嫁接機之研製=Development of an Automatic Grafting Machine for Propagating Passion Fruits |
|---|---|
| 作 者 | 李中正; 林砂; 朱健松; 黃裕益; | 書刊名 | 農林學報 |
| 卷 期 | 50:1 2001.03[民90.03] |
| 頁 次 | 頁1-14 |
| 分類號 | 434.251 |
| 關鍵詞 | 嫁接機; 接穗; 砧木; 百香果; Grafting machine; Scion; Stock; Passion fruits; |
| 語 文 | 中文(Chinese) |
| 中文摘要 | 本研究目的在降低百香果接工作對人工之依賴,期望以後此項作業能自動化,並推 廣到其他種苗嫁接自動化。已完成一部自動式百香果嫁接機之設計與製造,包括接穗切削裝 置、砧木苗處理裝置、插接機構、氣壓動力控制繆件、嫁托夾設計製作、嫁托夾整列篩選供 給裝置等,可以完對砧木苗的切斷、托穗插接口的切削、砧木劈開插接、嫁接夾送出與夾持 嫁接苗等工作,使嫁托機的作業性能與操作安全性皆行提高。試驗結果顯示,本嫁托機理論 作業能量為199.5株╱小,實際作業能量為114株╱小時,嫁接成功比例為70%,嫁接成活 比例為96%。本嫁接機為個人化作業,並不需要輸送帶,而工作平臺為雙邊雙層折疊式,在 不需要嫁接時可收回至兩側,不佔用空間。 |
| 英文摘要 | The purpose of this study was to develop an automatic grafting machine for passion fruit seedling. The mechanization of grafting on nursery-stock of passion fruit has been completed. Hopefully, The machine would be reached automatically and suitable for other plants. Prototype of grafting machine, which was developed and manufactured based on the procedures of manual graft, could be divide into scion cutting device, stock processing device, inserting guide mechanism, pneumatic control system and push fixed clip to fix grafted seedlings. Basic performance of this machine was conducted and results indicated that success ratio and ratio of survival after grafting could reach 70% and 96%, respectively. In addition, net working capacity of this machine was 199.5 plants per hour. Individual working, Worktables had folded both two sides and layers in this machine not occupied the space. |
本系統中英文摘要資訊取自各篇刊載內容。