查詢結果分析
來源資料
頁籤選單縮合
題名 | 臺灣一等衛星控制網之平差計算與精度分析=Adjustment and Accuracy Analysis of Taiwan First Order GPS Control Network |
---|---|
作者 | 楊名; 曾清涼; 余致義; 陳國華; Yang, Ming; Tseng, Ching-liang; Yu, Jyh-yih; Chen, Kwo-hwa; |
期刊 | 地籍測量 |
出版日期 | 19990600 |
卷期 | 18:2 1999.06[民88.06] |
頁次 | 頁1-27 |
分類號 | 440.98 |
語文 | chi |
關鍵詞 | 全球定位系統; 大地控制網; 多測站-多時段平差法; Global positioning system; Geodetic control network; Multi-station multi-session adjustment; |
中文摘要 | GPS(Global Positioning System)衛星全球定位系統是個新興的大地測量方法,其在數據處理方面與傳統的三角三邊測量有顯著的不同。 現今較普遍的 GPS 資料處理方式是運用單基線法平差模式進行 GPS 觀測資料之計算。 然而由於此方法只考慮了基線兩端測站觀測量之間的相關性,忽略與其他測站之觀測量也有相關性存在,故單基線法理論上並不嚴密。本文顧及 GPS 觀測資料平差計算之嚴密性,使用多測站 - 多時段嚴密平差法,在考慮所有同步觀測童之間的相關性下, 進行台灣一等 GPS 控制網觀測資料之解算,以求得到嚴謹可靠之平差成果。 並藉由精度分析,適當反映一等 GPS 控制網之真實精度。台灣一等GPS 控制網包含有 1O5 個一等衛星控制點,共 75 個觀測時段,經多測站 - 多時段嚴密平差後, 得到最小約制網點位內部精度平均值,緯度、經度及高程方向分別為± 0.2 公分、± 0.8 公分及± 1.6 公分。追蹤站框架網之內部精度平均值,緯度、經度及高程方向分別為± 0.8 公分、± 1.5 公分及± 2.7 公分。 |
英文摘要 | Global Positioning System (GPS) is a relatively new method for geodeticcontrol and its data handling is very different from the traditional triangulationmethod. The commonly adopted GPS data processing technique is known as thesingle baseline procedure, which separates individual baseline computation fromnetwork solution based on a selection of independent baselines. The procedure isrigorous if only two GPS receivers observe simultaneously. However, when morethan two receivers are operating simultaneously, the procedure is not rigorousbecause the stochastic information between concurrently observed baselines isneglected. GPS had been used to establish a new first order geodetic control network in Taiwan from 1995 to 1996. The network consists of 105 first order control points with 75 obserknow sessions. This study discusses the rigorous adjustment strategy know as the multi-station multi-session procedure that was adopted for the establishment of Taiwan first order control network. This research also con ducts error analyses of the network in order to reflect its actural accuracy. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。