查詢結果分析
來源資料
相關文獻
- 田口動態參數設計法於模糊控制上的應用
- 田口非線性動態品質特性在模糊控制上的應用
- Neural Network Procedures for Taguchi's Dynamic Problems
- 放電加工多重品質設計
- 放電加工製程參數最適化之研究
- 品質工程之田口式實驗設計
- Manufacturing Process Optimization of Short Glass Fiber Reinforced Polycarbonate Composites in Injection Molding
- 以田口分析法探討實驗參數對碳六十產率之影響
- 以田口方法探討不同氯化鈉濃度切削液對JIS SUS 304不銹鋼鑽削時之刀具壽命研究
- 應用田口方法於射膠螺桿之環式止逆閥最佳化設計
頁籤選單縮合
題名 | 田口非線性動態品質特性在模糊控制上的應用=Application of Taguchi Nonlinear Dynamic Quality Characteristics to Fuzzy Control System |
---|---|
作者 | 周至宏; 吳賢行; Chou, Jyh-horng; Wu, Xian-xing; |
期刊 | 科技學刊 |
出版日期 | 19990100 |
卷期 | 8:1 1999.01[民88.01] |
頁次 | 頁1-7 |
分類號 | 448.942 |
語文 | chi |
關鍵詞 | 模糊控制系統; 田口方法; 動態參數設計; Fuzzy control systems; Taguchi method; Dynamic parameter design; |
中文摘要 | 本文之目的是應用田口動態參數設計法,來尋找一不固定目標值之模糊控制系統 的最佳參數解,該模糊控制系統之數位式模糊控制器是採用單晶片微處理器發展而成的。文 中以一直流馬達之變換轉速控制作為應用田口動態參數設計法的說明例,其應用田口動態參 數設計法之目的,在找出模糊控制器中的最佳參數,使得馬達在各個不同需求及之定速度運 轉時,該速度之變異減至最小,以及轉速與可調因子具有理想的函數關係,且轉速輸出特性 對信號因子有較高的靈敏度;在需要變化轉速的場合,只調整可調因子(輸入電壓值),而 不必重新調整模糊控制器之參數的情況下,達到變異較小之變換轉速控制。 |
英文摘要 | The purpose of this work is application of Taguchi dynamic parameter design method to search for the optimal control parameters of a fuzzy control system with various target requirements. The digital fuzzy controller is implemented by using a single-chip microprocessor. An example of a DC motor control system with various velocity target requirements is given for illustration. By using Taguchi dynamic parameter design method, we can obtain the optimal control parameters of the fuzzy controller such that the DC motor control system can operate at various velocity targets with minimum variation, there exists an ideal relationship between the velocity and the signal factor, and the velocity response is sensitive to the signal factor. When we need change the velocity target, it is not necessary to redesign the control parameters of the fuzzy controller but only change te signal factor ( input voltage ) to obtain the desired velocity target with minimum variation. |
本系統之摘要資訊系依該期刊論文摘要之資訊為主。